FujiFilm Frontier-S DX100, Service Manual

Page: 165 / 303

165
4.5Disassembly and Assembly Procedure
DX100 Service Manual
4.5.6.2 PF Encoder Sensor
1. Remove the Top Cover. (P.97)
2. Remove the Upper Cover. (P.100)
3. Remove the Rear Frame. (P.101)
4. Remove the screw that secure the PF Encoder Sensor.
B) Silver M2.6x5 P-tite screw : one piece
5. Disengage the tab, and remove the PF Encoder Sensor in the direction indicated by the
arrow.
6. Release the FFC from the seven tabs.
Figure 4-119. Removing the PF Encoder Sensor (1)
7. Disconnect the FFC from the connector (CN110) of the Main Board.
8. Remove the FFC.
Figure 4-120. Removing the PF Encoder Sensor (2)
FFC
Tab
A
Tab
Tabs
PF Encoder Sensor
Attach the two tabs of the PF Encoder Sensor to the positioning hole and
groove of the sensor cover.
A D J U S T M E N T
R E Q U I R E D
Carry out the adjustments referring to "5.1.2 Adjustment Items and the
Order by Repaired Part" (p210) when the PF Encoder Sensor is removed
or replaced.
Main Board
CN110
FFC
Double-sided tape
Double-sided tape
PF Encoder Sensor
Positioning groove
Positioning hole
Sensor cover
Tabs