FujiFilm Frontier-S DX100, Service Manual

Page: 150 / 303

150
4.5Disassembly and Assembly Procedure
DX100 Service Manual
4.5.5.12 Middle Roller
1. Remove the Top Cover. (P.97)
2. Remove the Rear Cover. (P.99)
3. Remove the Upper Cover. (P.100)
4. Remove the Top Cover Open Sensor. (P.164)
5. Remove the Release Unit. (P.152)
6. Remove the U Guide. (P.148)
7. Remove the APG Unit. (P.128)
8. Remove the Driven release holder. (P.154)
9. Remove the PE Sensor Unit. (P.171)
10. Remove the Upper Paper Guide Unit. (P.155)
11. Remove the Middle Paper Guide. (P.149)
12. Remove the cut washer at the left side.
13. Release the tab of the two bushes and remove the bushes by rotating it in the direction
of arrow.
Figure 4-98. Removing the Middle Roller (1)
Bush
Tab
Cut washer
Tab
Bush
Middle Roller