5-39
5.3 Print Condition Setup and Check (02)
5
This menu is used to enable image correction
condition setting and custom setting condition editing
by selecting “Yes” for each item.
Set the image correction type for each input type.
Input Type: Negative
Reversal
B/W negative
[Selection]
[Setup and Maintenance]
→
[02 Print Condition Setup
and Check]
→
[0240 Image Correction Setup]
1. Set the seven items in the Hyper ACCS frame.
2. Click the [OK] button.
• Operation returns to the menu screen.
This menu is used to change the basic magnification
for each print size.
The magnification can be changed by Magnification
×
Rate / 100 in the “Rate” box.
[Selection]
[Setup and Maintenance]
→
[02 Print Condition Setup
and Check]
→
[0241 Fine Adjustment of the Print
Mag.Setting]
1. Select the carrier, mask and film types.
2. Select the print size.
3. Select “Rate”
Range: 50 % to 200 %
4. Click the [OK] button.
• Operation returns to the menu screen.
5.3.10
Image Correction Setup (0240)
5.3.11
Fine Adjustment of the Print Mag.Setting (0241)
