114
FMPC
9.2.2
Production Information 1 (411)
This menu is for daily confirmation of the volume of
production.
See “9.1.2 Production Information”.
9.2.3
Production Information 2 (412)
[Selection]
“4 Setup and Maintenance” - “1 System Operation
Setup and Check” - “2 Production Information 2”
[Procedure]
This menu is to view the cumulative amount of
production.
Confirm the production information for each input
type. The data can be cleared on this menu.
Input Type : Negative
Reversal
Digital Image
All
1
Record the production information.
2
To clear the data, follow the steps below.
(1) Use “Input Type” to choose which data you wish
to clear.
(2) Then press click [Clear].
• The “Clear production information?” dialog box
appears.
(3) Click [OK].
• The data is cleared and date of clearance
appears.
3
To save the data in the FD, follow the steps
below.
(1) Click the [FD Save] button.
(2) Insert the FD into the FD drive, then click the
[OK] button.
• The data is saved in the FD.
(3) Remove the FD from the drive, then click the
[OK] button.
distributed by www.minilablaser.com
