FujiFilm FinePix S9000 Owner'S Manual Download | Manualshive

Page: 55 / 73

background image

108

109

Software

Installation

5

5.2 INSTALLATION ON A Mac OS X

Pre-installation checklist

To run this software, you must have the hardware and software described below. Check your
system before you begin the installation.

■

Hardware and software requirements

Compatible Mac

Power Macintosh G3

✽

1

, PowerBook G3

✽

1

,

Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube, or PowerBook G4, Power Macintosh G5

Operating System

Mac OS X (compatible with version 10.2.8 to 10.3.9)

✽

2

RAM

192 MB minimum
Minimum 256 MB when RAW FILE CONVERTER LE is used

Hard disk space

Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
(When using ImageMixer VCD2 LE for FinePix: 2 GB or better)
Minimum 2 GB when RAW FILE CONVERTER LE is used (required on
the system disk)

Display

800

×

600 pixels or better, at least 32,000 colors

(When using ImageMixer VCD2 LE for FinePix: 1024

×

768 or better)

Internet connection

✽

3

i

To use the FinePix Internet Service or mail attachment function
An Internet connection or e-mail transmission software is needed

i

Connection speed: 56 k or better recommended

✽

1 Models with a USB port as a standard feature

✽

2 This software does not support QuickTime 7.

✽

3 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet

connection.

◆

Notes

◆

i

Connect the camera directly to the Macintosh using the USB cable (mini-B). The software may not
operate correctly if you use an extension cable or connect the camera via a USB hub.

i

Push the USB connector fully into the socket to ensure that it is securely connected. The software
may not operate correctly if the connection is faulty.

i

Additional USB interface board is not guaranteed.

i

On Macintosh PCs, allocate at least 400 MB of virtual memory when RAW FILE CONVERTER LE is
used. If other applications will be used at the same time, allocate the additional amount required for
those applications also.

5.1 INSTALLATION ON A Windows PC

1

Install FinePixViewer as instructed in the Quick start guide.

2

Install DirectX as directed by the on-screen instructions and then restart your PC. If the latest
version of DirectX is already installed on your PC, this installation is not performed.

●

!

If the latest version is already installed, this window does not appear.

●

!

Do not remove the CD-ROM during this procedure.

4

After restarting the PC, a message appears stating “Installation of the FinePixViewer has been
completed”.

3

After restarting, the USB Video Class Driver would
be installed.

●

!

If the latest version is already installed, this window does not
appear.

●

!

The driver is only installed on Windows XP SP1.

Do not connect the camera to your PC until the software installation is completed.

◆

Launching the installer manually

◆

1

Double-click the “My Computer” icon.

✽

Windows XP users should click “My Computer” in the “Start” menu.

2

Right-click “FINEPIX” (CD-ROM drive) in the “My Computer” window and select “Open”.

3

Double-click “SETUP” or “SETUP.exe” in the CD-ROM window.

◆

Installing other applications

◆

You may see messages for installing ImageMixer VCD2 LE for FinePix. Install this application as
directed by the on-screen instructions.

✽

The way file names are displayed differs as described below depending on your PC settings.

i

File extensions (3-letter suffixes indicating the file type) may be shown or hidden. (e.g. Setup.exe or Setup)

i

Text may be shown normally or all in uppercase (e.g. Setup or SETUP).

«
...
53
54
55
56
57
...
»

Summary of Contents for FinePix S9000










































































Reviews:

No comments

Related manuals for FinePix S9000

EF-S60mm f/2.8 MACRO USM

Brand: Canon Pages: 16

Brand: Canon Pages: 35

EF50mm f/1.0L USM

Brand: Canon Pages: 11

EF 400mm f/2.8L IS II USM

Brand: Canon Pages: 17

Speedlite 420EX

Brand: Canon Pages: 56

EF 28-80mm 1:2.8-4.0L USM

Brand: Canon Pages: 2

Speedlite 380EX

Brand: Canon Pages: 10

Speedlite 380EX

Brand: Canon Pages: 25

SPEEDLITE 300EZ

Brand: Canon Pages: 8

Brand: Canon Pages: 19

EF 100-400mm f/4.5-5.6L IS USM

Brand: Canon Pages: 17

Speedlite 133 D

Brand: Canon Pages: 20

CN-E30-105mm T2.8 L S

Brand: Canon Pages: 6

Macro Ring Lite MR-14EX

Brand: Canon Pages: 136

Brand: Canon Pages: 196

550EX - Speedlite - Hot-shoe clip-on Flash

Brand: Canon Pages: 49

220EX - Speedlite - Hot-shoe clip-on Flash

Brand: Canon Pages: 44

EF 400mm f/2.8L IS II USM

Brand: Canon Pages: 29

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands