FujiFilm FINEPIX S3200 Series, Owner'S Manual

Page: 96 / 147

80
Using the Menus: Shooting Mode
■ ■
h h
: Custom White Balance : Custom White Balance
Choose
h
to adjust white balance for unusual
lighting conditions. White balance measurement
options will be displayed; frame a white object so
that it fills the monitor and press the shutter but-
ton all the way down to measure white balance.
If “ COMPLETED! ” is displayed , press MENU/OK to set
white balance to the measured value. This value
can be reselected by pressing
MENU/OK when cus-
tom white balance options are displayed.
If “ UNDER ” is displayed , raise exposure compensa-
tion (pg. 44) and try again.
If “ OVER ” is displayed , lower exposure compensa-
tion and try again.
2
Tip
To give a deliberate color cast to your photographs,
measure a value for custom white balance using a col-
ored instead of a white object.
H H SHARPNESS SHARPNESS
Choose whether to sharpen or soften outlines.
•
HARD : Use for sharp outlines when photograph-
ing such subjects as buildings and text.
• STANDARD : Standard sharpness. Best choice in
most situations.
• SOFT : Use for soft outlines in portraits and similar
subjects.