FujiFilm FinePix FinePix S9600, Service Manual

Page: 30 / 154

2-16
2. Disassembly
FinePix S9100/S9600 Service Manual
1
2
3
4
5
6
1
7
8
10
4
5
6
9
2
3
12
11
11
2-8. Removing the FRAME PWB/FRAME BATT
(1) Remove the screw (M1.7 x 5.0).
(2) Remove the screw (M1.7 x 4.0).
(3) Remove the screw (M1.7 x 5.0).
(4) Remove the FRAME BATT.
(5) Pull off the BASE TRIPOD in the direction of the
arrow.
(6) Remove the FRAME PWB.
2-9. Disassembling the CASE F CONST
(1) Remove the 4 screws (M2.0 x 8.0).
(2) Pull off the LENS CONST to the front.
(3) Open the BATTERY LID.
(4) Remove the screw (M1.7 x 4.0).
(5) Widen the gap between the CASE F and the BATT
HOLDER.
(6) Pull the UNIT BATT HOLDER off in the direction of
the arrow.
(7) Remove the 4 screws (M1.7 x 5.0).
(8) Remove the screw (M1.7 x 4.0).
(9) Remove the HOLDER LENS.
(10) Remove the STRAP LEFT from the inside.
(11) Push the catch on the inside of the BUTTON FLASH
in the direction of the arrow.
(12) Pull off the BUTTON FLASH in the direction of the
arrow.
[Notes on assembly]
Take care not to lose the CSP, which is removed a the
same time.