FujiFilm FinePix FinePix S9600, Service Manual

Page: 113 / 154

4-45
4. Adjustments
FinePix S9100/S9600 Service Manual
4-16. [F1] : Battery Voltage Adjustment
<Setup for Battery Voltterge Adjustment>
(1) When adjusting the battery voltage, supply power (5.0V) to the camera from the [Power Cable Jig] before setting the jig
mode.
(2) Always measure input voltage in the vicinity of the DC IN terminal.
(3) When reducing the voltage, adjust the stabilized power supply to ensure that the voltage is not reduced excessively from
the measured point. The adjustment software may produce an error if communication between the adjustment software
and the camera is disrupted. Restart the adjustment software in this case.
<Step 1>
Select [F1] Battery Voltage Adjustment on the [Adjustment Items Select] screen.
—> The [Battery Voltage Adjustment Preparation] screen appears.
USB
USB cable
Power supply cable jig
Digital voltmeter
PC for adjustments and checks
Regurated
Power supply
DC JACK
FinePix S9100/S9600