FujiFilm FinePix FinePix S6500fd, Service Manual

Page: 68 / 138

4-6
4. Adjustments
FinePix S6000fd/S6500fd Service Manual
4-6. Initial Settings of the Adjustment Software
* The initial settings are already written in the "FFW.ini" file,
therefore perform the following procedure to the letter.
Note that, if you change file names, the software will not
start up.
* The initial settings of steps 3 to 6 are already set in the
"FFW.ini" file. Therefore, you need only to check them.
* Do not rewrite the user program
(FxS6000fd_6500fd_W_0.ff). If the program is rewritten, the
adjustment software will not startup.
<Step 1>
Double-click on the "FFW.exe" execute file of the adjustment
software to open the "FinePixS6000fd_6500fd_W Adjustment
Software Startup" screen (Fig. 4-6-1).
<Step 2>
Click on "Settings" ([1] in Fig. 4-6-2) in the menubar of the
startup window.
Then, select "Mode setting" ([2] in Fig. 4-6-2) from the pull-
down menu that appears.
<Fig. 4-6-2>
(1) (2)
FinePix S6000fd_6500fd_W Adjustment Software Start-up Screen
Select [Start] from [Operate] on the FFW Toolbar
—> The adjustment software starts
FinePix S6000fd_6500fd_W Adjustment Software Start-up Screen
Select [Start] from [Operate] on the FFW Toolbar
—> The adjustment software starts
<Fig. 4-6-1>
FxS6000fd_6500fd_W_0.ff