FujiFilm FinePix F30, Service Manual

Page: 75 / 111

75
4. Adjustments
FinePix F30 Service Manual
FinePix F30
FxF30 Battery jig
USB cable or
Multi cable (AV/USB) for F30
Digital voltmeter
Regurated
Power supply
PC for adjustment and checks
4-13. [F1] : Battery Voltage Adjustment
<Setup for Flash Adjustment>
(1) When adjusting the battery voltage, supply power (3.70V) to the camera from the [FxF30 Battery jig] before setting the jig
mode.
(2) Always measure input voltage in the vicinity of the DC IN terminal.
(3) When reducing the voltage, adjust the stabilized power supply to ensure that the voltage is not reduced excessively from
the measured point. The adjustment software may produce an error if communication between the adjustment software
and the camera is disrupted. Restart the adjustment software in this case.
<Step 1>
Select [F1] Battery Voltage Adjustment on the [Adjustment Items Select] screen.
—> The [Battery Voltage Adjustment Preparation] screen appears.