FujiFilm DR-ID 1300, Service Manual

Page: 335 / 628

MU2-70
MU2-70
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-03E
1.14 RESTORE

Function
Copies the configuration information and the machine-specific data from a desired
location on the CL (a recording medium or a folder) to the HDD of the MC.
You can restore the following data:
No. Selection item Data to be restored
1 CONFIGURATION Configuration file
2 HISTORY LOG Use status statistic file of the FPD
3 INDIVIDUAL PANEL DATA
Update the machine-specific data (defect upon shipment,
sensitivity correction coefficient) of an individual panel by
specifying the panel number.
4 CORRECT PANEL DATA
Update the correction data (gain, offset, dot defect 4, 2, 5,
6, defect upon shipment, sensitivity correction coefficient)
of an individual panel by specifying the panel number.
u
NOTE
u
The restored data become effective after the RU is restarted.

Procedures
Select the item to be restored, and then select the location where the data resides (drive
or folder).
You can select only the drive or the folder recognized by the CL as the location.
u
INSTRUCTION
u
Do not restore the data (file or folder) while selected via the Windows Explorer.
Restore may result in failure, and an error message may appear.
DRID600_G0067.ai
Select (double-click) the region
to restore.
The selected
location
appears.
Only the drives and directries
recognized by the CL are
displayed as regions to which
the data can be restored.
ex.: When restoring the
configuration, do not specify
the folder CONFIG, but the
folder one level higher.
Configuration C
CONNECTION TEST
RU NAME
LIST OF EXISTING RU
RU IP ADDR
BACKUP RESTORE
ALL RUs SETTING
EACH RU SETTING
( )
Select the item to be restored
with the RU PC-TOOL, and then
click on "EXECUTE".
Click to change
the region to restore.
Select panel number.