FujiFilm DR-ID 1300, Service Manual

Page: 304 / 628

MU2-39
MU2-39
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-02E
[6.1] Offset Calibration >>

Display Window
Offset Calibration>> window
1200_400028E.ai

Function Description
Carries out offset calibration.
No exposure is made during offset calibration.
The offset calibration takes place for all of connected SE’s.
u
NOTES
u
- Always click [Create an Offset Data] after you click [Start]. Processing cannot
be terminated, waiting for data generation, if you click [BACK] without clicking
[Create an Offset Data]. Return to the “Store Mode” window, and again follow the
procedures in this case.
- Clicking [Start] during automatic offset update (always taking place approx. at
10-minute intervals when no exposure menu is selected), “Error 12700 currently
unavailable” is displayed. Again click [Start] approx. 30 seconds later in this case.
REFERENCE
Whether the check is successfully completed appears on the result display area.
An error code is displayed in some cases. Refer to the Troubleshooting manual and
take appropriate countermeasures.
Correction data for use in still image radiography is generated.
Clicking [Start], the mode setting takes place.
Clicking [Create an Offset Data] thereafter, the correction data is generated.