FujiFilm DR-ID 1300, Service Manual

Page: 130 / 628

MC-17
MC-17
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-02E
2.12 Replacing the MP whose Local IP Address
Is Changed
When the MP whose local IP address is changed from the default value (192.168.0.20)
is to be replaced, refer to the following procedures to proceed with operation.
Also refer to the following procedures for replacing the MP MPC54B board whose
local IP address is changed from the default value (192.168.0.20).
n
Changing the Local IP Address to the Default Value
REFERENCE
The IP address of the MC ETH1 needs to be returned to the default value when the
MP or the MPC54B board is to be replaced. Mentioned below are the procedures for
returning the IP address of the MC ETH1 and then replacing the MP.
(1) Back up the respective data.
- CONFIGURATION
- HISTORY LOG
- CORRECT ALL DATA
{MU2:1.13_BACKUP}
(2) Set the IP address of the MP and MC to the default value on the Local
Network PreSetting.
{MU2:[1.1]_Local Network PreSetting >>}
REFERENCE
It is not necessary to change the IP address of the SE.
(3) Click [MP Network Setting >>] on the Network Setting window.
The MP Network Setting >> window appears.
(4) Click [MP1 Network Setting >>] on the MP Network Setting window >>.
The MP1 Network Setting >> window appears.
(5) Click [Setting for MP1].
The confirmation dialogue box of “Are you sure?” appears.
(6) Click [OK].
(7) Click [MP Network Setting >>] on the Network Setting window.
The MP Network Setting >> window appears.
(8) Click [MP2 Network Setting >>] on the MP Network Setting window >>.
The MP2 Network Setting >> window appears.
(9) Click [Setting for MP1].
The confirmation dialogue box of “Are you sure?” appears.
(10) Click [OK].
(11) Click [BACK] to return to the MP Network Setting >> window.
(12) Click [BACK] to return to the Network Setting window.
(13) Turn OFF the power of the MP, and then turn it ON again.
(14) Left-click the MC Manager from the task tray and execute "EXIT".
Check that the MC Manager icon has disappeared from the task tray, and then start
the MC Manager from "Start menu" → "Start-up".
(15) Delete the RU registered in the RU PC-TOOL.
{MU2:1.3_DELETE}
(16) Re-install the RU PC-TOOL.
REFERENCE
The IP address of the MC ETH1 restores to the default value by re-installing the
RU PC-TOOL.