FujiFilm CR-IR341, Service Manual

Page: 857 / 1472

CR-IR341 Service Manual MU - 66
009-051-07
08.30.2001 FM3115
MU - 66
2 3 4 5 6 7 9 10 1 8 C
ONTENTS
7.14 Network-Related Setup Example
An example of how to change the settings of the network-related configuration file is
presented below. Referring to this example, configuration file settings should be made as
appropriate for each system configuration.
■
Setup Example 1
• Two units of the IDT-IV are connected to the CPU90E board of the machine via a 10Base-T
hub.
• The OD-F624, HI-C654 and FN-PS551 are connected to the CPU90F board of the
machine via a 10Base-T hub.
• The machine and FL-IMD are connected via the E-i/f (IMG08A).
• The host is temporarily connected (including virtual equipment).
The “Hostname” of each CR unit installed at a hospital, including the CR-IR341 itself,
should be registered so that the configuration file can easily copied and restored to other
units.
A example of description (bold faced) for the above setup is presented below.
●
REMOTE SWITCH (RMT_SW.CFG)
| # |
| #RMT_SW.CFG |
| # |
| 172.16.0.128,root,”NOPK 1000" |
●
EQUIPMENT (EQUIP)
| # |
| # EQUIP |
| # |
| # Function Host Name [Host Name]... |
| # Function = OD_FILE or DISPLAY or PRINT or IDT |
| OD_FILE odf624 |
| DISPLAY hic654 |
| PRINT LOCAL fn-ps551 |
| IDT fcridt4-1 fcridt4-2 |