FujiFilm ClearView CS, Service Manual

Page: 596 / 1404

CR-IR 363
Service Manual
MC-107
MC-107
011-202-08E
09.30.2009 FM5540
6.16 IP Transport Motor (MB1)
{SP:INDEX}

Removal Procedures
1.
Remove the gears bracing bracket (upper opposite-reference side).
{MC:6.11 _Gears Bracing Bracket (Upper Opposite-Reference Side)}
2.
Put the feed/load conveyor unit in an orientation illustrated below.
3.
Remove the spur gears.
4.
Remove the MB1.

Reinstallation Procedures
For reinstallation, reverse the removal steps.

Check/Adjustment Procedures
l
CHECK 1
Make sure that the spur gear is attached at its correct orientation.
{MC:6.13 _Conveyance Mechanism (Opposite-Reference Side Gears)_

Check/Adjustment Procedures}
l
CHECK 2
Make sure that the MB1 is installed in its correct orientation.