Fuji Xerox Versant 80 Press, User Manual

Page: 76 / 1019

2 Product Overview
76
Pr
o
d
uct
O
v
er
v
iew
2
Screens and Buttons Displayed
You can change the services displayed on the touch screen or the features assigned to the
buttons to make best use of the machine.
The following describes how to change the screen default, the services displayed after Auto
Clear, the services displayed on the Services Home screen, and the services assigned to the
custom buttons, and how to adjust the screen brightness.
Note • The following settings may have been changed by the system administrator. Use the machine
according to the changes that have been made.
For information on how to change the other settings of the control panel, refer to "Screen/Button Settings" (P.425).
Setting the Initial Screen
You can change the screen displayed when the machine is turned on or the Power Saver
mode is deactivated.
The Services Home screen is displayed by factory default.
1
Press the <Log In/Out> button.
2
Enter the system administrator’s user ID with
the numeric keypad or the keyboard displayed
on the screen, and select [Enter].
When a passcode is required, select [Next] and
enter the system administrator’s passcode, and
select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3
Select [Tools] on the Services Home screen.
Note • When the Services Home screen is not
displayed on the touch screen, press the
<Services Home> button.
4
Select [System Settings] > [Common Service
Settings] > [Screen/Button Settings].
1 2 3
4 5 6
7 8 9
0 ＃
<Log In/Out> button