Fuji Xerox Versant 80 Press, User Manual

Page: 486 / 1019

13 Tools
486
Too
ls
13
„
Maximum Number of Search Results
Set a maximum number of address to display from search results from 5 to 100. If the
search results exceed the maximum, the search stops at the maximum number set. The
default value is 50.
„
Search Time-Out
Select whether or not to set a search time-out. Set the value from 5 to 120 seconds in 1
second increments.
SMB Server Settings
Set the following items to use SMB server as a remote authentication server.
„
SMB Server Setup
Select the server specification method from [By Domain Name] and [By Domain & Server
Names/IP Address].
According to the option you selected here, set [Domain Name] and [Server Name/IP
Address] for SMB servers 1 to 5 respectively. The setting for SMB server 1 is used as the
default setting for authentication.
„
Domain Name
Enter the domain name of the server. Up to 64 characters are allowed.
This setting is mandatory regardless of the SMB server specification method selected for
[SMB Server Setup].
Important • Use the NetBIOS or Active Directory domain name for the domain name.
„
Server Name/IP Address
Enter the server name or IP address.
This setting is valid when [SMB Server Setup] is set to [By Domain & Server Names/IP
Address].
Important • Use the NetBIOS computer name or full computer name with DNS suffix for the server name.
• For IPv4, enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to
255.
Security Settings
Set the security settings.
SSL/TLS Settings
Configure the SSL/TLS settings to encrypt the communication between the server or the
client computer and the machine. Enabling SSL/TLS protects the communication from an
unauthorized access and prevents information leakage or data falsification.
„
Device Certificate - Server
Select a certificate for HTTP SSL/TLS communications.
„
HTTP - SSL/TLS Communication
Select whether or not to enable HTTP SSL/TLS communications.
„
HTTP - SSL/TLS Port Number
Set the port number used for HTTP SSL/TLS communication from 1 to 65535.
The default value is 443.