Fuji Xerox Versant 80 Press, User Manual

Page: 394 / 1019

12 Computer Operations
394
Co
m
p
ut
e
r O
p
er
at
io
n
s
12
Changing Network Scanner Driver Settings
To learn about fields in the displayed dialog box, click [Help] to view the Network Scanner Driver's help.
„
Changing the display of scanner names
You can change the display of scanner names listed.
To change the display of scanner names, use the dialog
box that appears by clicking [Search/Display Settings] in
the scanner selection dialog box.
Under [Scanner Name Display], you can change the
method in which scanner names are displayed in
[Scanners Detected].
Specify scanners to search for under [Search Target
Settings].
Note • If you click [Add] and then register a scanner, you can
display scanners from other networks.
„
Import method for scanned files
You can change the display and the import settings for
files scanned from a folder.
To change the import method, click [Import Settings]
from [File] menu in the file selection dialog box, and
configure the settings in the dialog box that appears.
Importing Using Stored File Manager 3
The following describes how to use Stored File Manager 3 to import files from a machine's
folder.
Stored File Manager 3 is software to import files from a machine's folder to a computer
without using any client-side application.
To use Stored File Manager 3, your computer must have Network Scanner Utility 3 installed.
Note • Network Scanner Utility 3 is included in the Software/Manual CD-ROM.
• When Secondary Ethernet (optional) is installed on the machine and the IP address of Ethernet2 is
specified, Network Scanner Utility 3 cannot operate. For more information, refer to "TCP/IP -
Network Settings / TCP/IP - Network Settings (Ethernet 1), TCP/IP - Network Settings (Ethernet 2)"
(P.474).
To import files stored in a folder, prior settings are required, such as enabling ports. For more information, refer to
"Configuration of Store to Folder" (P.584). For information on the operation of the application, refer to the documentation
provided with the application.
For information on how to install Stored File Manager 3, refer to the "Readme" file included in the Software/Manual CD-
ROM.
To learn about fields in the displayed dialog box, click [Help] to view the Stored File Manager 3 help.
1
Click [Start] and select [Programs] > [Fuji Xerox] > [Network Scanner Utility 3] > [Stored File
Manager 3].
Note • If you used another directory for installation, specify the directory instead.