Fuji Xerox Versant 3100 Press, Optional Units Manual

Page: 14 / 96

14
Optional Units Manual
When Lamp E7 is Lit
(1) Pull out the Tray 9 toward you until it stops.
Important
Before pulling out the Tray, make sure no paper is
jammed inside the right side cover.
(2) Remove jammed papers.
(3) Make sure the long-side and short-side paper guides are positioned to just touch the
paper, and then push the Tray into the machine.
1.2.2 Paper Jams inside the Right Side Cover
Follow the steps below to clear paper jams inside the cover of the 2nd High Capacity Feeder C1-DS.
1.
Open the right side cover of the 2nd High Capacity
Feeder C1-DS.
2.
Remove jammed papers.

When Lamp E1 is Lit........................................................................................................................................................... p.15

When Lamp E2 is Lit........................................................................................................................................................... p.15

When Lamp E3 is Lit........................................................................................................................................................... p.16

When Lamp E4 is Lit........................................................................................................................................................... p.16
Note Solutions differ depending on where the paper jam occurs. Confirm the jammed area in the Error
Message area.
The code (E) on the upper-left part of the message indicates which error lamp on the top of the
machine is illuminating.