Stopping the Copy Job
51
Copy
2
Stopping the Copy Job
This section describes the procedure for stopping the copy job.
1
Press the <Stop> button on the control panel
while the document is being scanned or output.
The machine stops scanning. When the machine
is feeding a document, it will suspend operation
after ejecting the document completely.
2
If an document jam occurs, follow the instruc-
tions on the touch screen.
3
When the [Copy - Stop] screen appears, select
[OK].
All scanned document images are deleted, and
the copy job is canceled.
Note
•
Selecting [Cancel] allows the machine to con-
tinue the copy job.
Job Status
Machine Status
Log In/Out
Clear All
Interrupt
Start
Stop
Transmitting
Copy Scan Menu
Job in memory
Copy from
Memory
Power Saver
<Stop> button
Document Jam
1. Open scanner cover.
2. Follow the label to
remove the document.
3. Close scanner cover.
Document Jam
1. Open scanner cover.
2. Follow the label to
remove the document.
3. Close scanner cover.
Copy - Stop
Stop copying.
The current scan job will be deleted from
memory.
Select OK to cancel the current job.
OK
Cancel
