Fuji Xerox DocuScan C3200 A User Manual Download Page 194

Page: 194 / 244

194

8 Problem Solving

Problem Solving

8.1

Identifying Your Problem

Problem Solving Procedure

If a problem occurs with the scanner, follow the following procedure and remedy the
problem:

If the problem could not be resolved with this procedure, contact our Customer Support
Center.

It is an image quality problem.

A problem occurred.

"8.3 Hardware Problems (P. 199)"

Is it an image quality problem?

"8.4 Image Quality Problems (P. 203)"

Did it occur while using one of the scanner’s features?

It occurred while using one of the scanner’s features.

"8.5 Scanner Feature Problems (P. 205)"

Refer to "A.5 Notes and Restrictions (P. 234)" in Appendix.

Check the usage restrictions.

Is it a network-related problem?

It is a network-related problem.

Is an error code displayed on the control panel?

An error code is displayed.

"8.7 Error Codes (P. 208)"

"8.2 Clearing Document Jams (P. 195)"

It is a document jam.

It is a problem other than a document jam.

Summary of Contents for DocuScan C3200 A




















































































































































































































































Search results

Summary of Contents for DocuScan C3200 A

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuScan C3200 A, User Manual

Search results

Summary of Contents for DocuScan C3200 A

Reviews:

Brands by name

Popular brands