Fuji Xerox DocuPrint P505 d User Manual Download Page 187

Page: 187 / 279

Image Quality Trouble

187

Proble

Solvin

Image Quality Trouble

If the image quality of printed documents is poor, identify the symptom in the following
table to perform the remedy.

If image quality does not improve even after performing the remedy, contact our Customer
Support Center.

Symptom

Cause

Remedy

Printing is faint.
(smudged,
unclear)

The paper is damp.

Replace the paper with new one.

Reference



Refer to "Loading Paper" (P.41).

The drum cartridge has
deteriorated or is damaged.

Replace the drum cartridge with a new one.

There is no toner left in the
toner cartridge.

Replace the toner cartridge with a new one.

Reference



Refer to "Replacing Toner Cartridge" (P.159).

Black dots are
printed.

The drum cartridge has
deteriorated or is damaged.

Replace the drum cartridge with a new one.

Black lines are
printed.

The drum cartridge has
deteriorated or is damaged.

Replace the drum cartridge with a new one.

Summary of Contents for DocuPrint P505 d























































































































































































































































































Search results

Summary of Contents for DocuPrint P505 d

Reviews:

Related manuals for DocuPrint P505 d

Brands by name

Popular brands

Fuji Xerox DocuPrint P505 d, User Manual

Search results

Summary of Contents for DocuPrint P505 d

Reviews:

Related manuals for DocuPrint P505 d

Brands by name

Popular brands