manualshive.com logo in svg

Fuji Xerox DocuPrint P455 D, User Manual, Page: 278 / 302

Share
Download
Fuji Xerox DocuPrint P455 D User Manual Download Page 278

278

Maintenance

Moving the Printer

This section describes how to move the printer.

IMPORTANT: 

•

To prevent you from dropping the printer and getting backache or injuries, lift the printer by firmly gripping the recessed areas 
on both sides of the printer. Never lift the printer by gripping any other areas.

NOTE: 

•

If the optional 550 sheet feeder has been installed, uninstall the all optional 550 sheet feeders before moving the printer. If the 
optional 550 sheet feeder is not fixed securely to the printer, it may fall to the ground and cause injuries. For details on how to 
uninstall the optional 550 sheet feeder, see 

"Removing the Optional 550 Sheet Feeder" on page 281

.

1

Turn off the printer and disconnect the power cord, interface cable, and any other cables.

IMPORTANT: 

•

If the optional hard disk unit is not installed on your printer, note that the data in the memory are cleared when the printer 
is turned off.

2

Remove any paper in the output tray and slide the output tray extension inside the printer.

3

Lift the printer and move it gently.

NOTE: 

•

If you move the printer over a long distance, remove the toner cartridge from the printer to prevent toner from 
spilling, and pack the printer inside a box.

Summary of Contents for DocuPrint P455 D















































































































































































































































































































Reviews:

No comments