Fuji Xerox DocuPrint P375 d User Manual Download Page 12

Page: 12 / 303

Home >

Introduction to Your Fuji Xerox Machine

> Control Panel Overview

Control Panel Overview

The control panel may vary depending on your model.

1. Liquid Crystal Display (LCD)

Displays messages to help you set up and use the machine.

(For DocuPrint P385 dw/DocuPrint P375 dw)

A four-level indicator shows the wireless signal strength if you are using a wireless connection.

2. Data LED

The

Data

LED blinks depending on the machine’s status.

When the

Data

LED is on, data is in the machine’s memory. When the

Data

LED blinks, the machine is

receiving or processing data.

3. Error LED

The

Error

LED blinks when the LCD displays an error or an important status message.

Max

Summary of Contents for DocuPrint P375 d
















































































































































































































































































































Search results

Summary of Contents for DocuPrint P375 d

Reviews:

Fuji Xerox DocuPrint P375 d, User Manual, Page: 12 / 303

Search results

Summary of Contents for DocuPrint P375 d

Reviews: