Fuji Xerox DocuPrint P355 d, User Manual

Page: 95 / 272

Printer Connection and Software Installation
95
3
Select Hardware on YaST Control Center , and select Printer .
The Printer Configurations dialog box opens.
For network connections (DocuPrint P355 d Only):
a
Click Add .
The Add New Printer Configuration dialog box opens.
b
Click Connection Wizard .
The Connection Wizard dialog box opens.
c
Select Line Printer Daemon (LPD) Protocol from Access Network Printer or Printserver Box via .
d
Enter the IP address of the printer in IP Address or Host Name: .
e
Select Fuji Xerox in Select the printer manufacturer: .
f
Click OK .
The Add New Printer Configuration dialog box appears.
g
Select DocuPrint XXX vx.x [FujiXerox/Fuji_Xerox_DocuPrint_XXX.ppd.gz] from the Assign Driver list.
NOTE:
• You can specify the printer
name in Set Name: .
For USB connections:
a
Click Add .
The Add New Printer Configuration dialog box opens.
The printer name is displayed in the Determine Connection list.
b
Select DocuPrint XXX vx.x. [FujiXerox/Fuji_Xerox_DocuPrint.ppd.gz] from the Assign Driver list.
NOTE:
• You can specify the printer name in Set Name: .
4
Confirm the settings, and then click OK .

Setting the Default Queue
• For Red Hat Enterprise Linux 5/6 Desktop (x86)
The following procedure uses Red Hat Enterprise Linux 6 Desktop(x86) as an example:
1
Select Applications → System Tools → Terminal .
2
Enter the following command in the terminal window.
• For SUSE Linux Enterprise Desktop 10/11 (x86)
The following procedure uses SUSE Linux Enterprise Desktop 11 (x86) as an example:
1
Select Computer → More Applications... , and select YaST on Application Browser .
2
Enter the administrator password.
YaST Control Center is activated.
3
Select Hardware on YaST Control Center , and select Printer .
The Printer Configurations dialog box opens.
su
(Enter the administrator password)
lpadmin -d (Enter the queue name)