manualshive.com logo in svg

Fuji Xerox DocuPrint P355 d, User Manual

Share
Download
Fuji Xerox DocuPrint P355 d User Manual Download Page 57

Basic Operation

57

Power Saver Mode

The printer has an energy saving feature that reduces power consumption during periods of inactivity. This feature 
operates in two modes: the Low Power mode and Sleep mode. As delivered, the printer switches to the Low Power 
mode three minutes after the last print job is printed. The printer then switches to the Sleep mode after another one 
minute of inactivity. When the printer is in the Low Power mode, 

 (

Energy Saver

) button lights up, and the LCD 

backlight turns off. In the Sleep mode, the display also goes blank and displays nothing.
The factory default setting of one minute for each mode is changeable within the range of 1 to 60 minutes (Low 
Power mode and Sleep mode). The printer returns to the ready-to-print state in about 16 seconds when re-activated.
The printer can switch from the ready-to-print state to the Low Power mode without waiting right after pressing 

 

(

Energy Saver

) button. Press 

 (

Energy Saver

) button to switch to Power Saver mode to save electricity.

NOTE: 

•

The functions of Low Power mode and Sleep mode cannot be disabled.

See also: 

• "Setting the Power Saver Time Option" on page 182

Exiting the Power Saver Mode

The printer automatically exits the Power Saver mode when it receives a print job from a computer. To manually exit 
the Low Power mode, press the 

 (

Energy Saver

) button on the operator panel. To exit the Sleep mode, press the 

 (

Energy Saver

) button. 

NOTE: 

•

Opening and closing a cover will cause the printer to exit the Low Power mode and the Sleep mode.

•

When the printer is in the Sleep mode, all buttons on the operator panel except for the 

 (

Energy Saver

) button do not 

function. To use the buttons on the operator panel, press the 

 (

Energy Saver

) button to exit the Sleep mode.

See also: 

• "Setting the Power Saver Time Option" on page 182

Summary of Contents for DocuPrint P355 d

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands