Fuji Xerox DocuPrint P355 d User Manual Download Page 239

Page: 239 / 272

Maintenance

239

Installing a Drum Cartridge

Unpack a new drum cartridge.

Insert the drum cartridge into the cartridge slot, and then push until it stops.

NOTE:

•

The protective cover of the drum comes off while inserting the drum cartridge into the cartridge slot. You do not need to
remove it in advance.

Make sure that the two tabs of the toner cartridge align with the grooves on the printer, and then insert it into the
printer until it clicks.

Grasp the toner cartridge lock lever, and then pull it down until it stops.

Close the front cover.

Summary of Contents for DocuPrint P355 d
















































































































































































































































































Search results

Summary of Contents for DocuPrint P355 d

Reviews:

Related manuals for DocuPrint P355 d

Brands by name

Popular brands

Fuji Xerox DocuPrint P355 d, User Manual

Search results

Summary of Contents for DocuPrint P355 d

Reviews:

Related manuals for DocuPrint P355 d

Brands by name

Popular brands