manualshive.com logo in svg

Fuji Xerox DocuPrint P355 d, User Manual

Share
Download
Fuji Xerox DocuPrint P355 d User Manual Download Page 219

Troubleshooting

219

Damage on the Leading Edge of Paper

The Top and Side Margins Are Incorrect

Problem

Action

The output is damaged on its 
leading edge.

When using the bypass tray, reverse the paper and then try again. 
If the problem persists, change the paper with another one and then try again.
When using the standard 250 sheet tray or optional 250 sheet feeder, change the 
paper and then try again.
If the problem persists, contact the Fuji Xerox local representative office or an 
authorised dealer.
Change the paper with another one and then try again.
If the problem persists, use the standard 250 sheet tray or optional 250 sheet feeder 
in place of the bypass tray.
Use the standard 250 sheet tray or optional 250 sheet feeder in place of the bypass 
tray.
If the problem persists, contact the Fuji Xerox local representative office or an 
authorised dealer.

Problem

Action

The top and side margins are 
incorrect.

Ensure that the margins are set correctly on the application being used.
If the problem persists, contact the Fuji Xerox local representative office or an 
authorised dealer.

Summary of Contents for DocuPrint P355 d

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands