Fuji Xerox DocuPrint P355 d User Manual Download Page 162

Page: 162 / 272

162

Using the Operator Panel Menus

• TCP/IP

Purpose:

To configure TCP/IP settings.

Values:

IPsec feature is available only when IPsec is enabled on the CentreWare Internet Services.

IP Mode Dual Stack

Uses both IPv4 and IPv6 to set the IP address.

IPv4

Uses IPv4 to set the IP address.

IPv6

Uses IPv6 to set the IP address.

IPv4

Get IP Address

DHCP / Autonet

Sets the IP address automatically. A random value in the
range of

169.254.1.0

169.254.254.255

that is not

currently in use on the network is set as the IP address. The
subnet mask is set as

255.255.0.0

BOOTP

Sets the IP address using BOOTP.

RARP

Sets the IP address using RARP.

DHCP

Sets the IP address using DHCP.

Panel

Use this option when you want to set the IP address manually
on the operator panel.

IP Address

When an IP address is being set manually, the IP is allocated
to the printer using the format

nnn.nnn.nnn.nnn

. Each octet

that makes up

nnn.nnn.nnn.nnn

is a value in the range of

254

127

and any value in the range of

224

254

cannot

be specified for the first octet of a gateway address.

Subnet Mask

When an IP address is being set manually, the subnet mask is
specified using the format

nnn.nnn.nnn.nnn

. Each octet

that makes up

nnn.nnn.nnn.nnn

is a value in the range of

255. 255.255.255.255

cannot be specified as the

subnet mask.

Gateway Address

When an IP address is being set manually, the gateway
address is specified using the format

nnn.nnn.nnn.nnn

Each octet that makes up

nnn.nnn.nnn.nnn

is a value in

the range of

254

127

and any value in the range of

224

254

cannot be specified for the first octet of a gateway

address.

IPsec

Disable

Disables IPsec.

Summary of Contents for DocuPrint P355 d
















































































































































































































































































Search results

Summary of Contents for DocuPrint P355 d

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint P355 d, User Manual

Search results

Summary of Contents for DocuPrint P355 d

Reviews:

Brands by name

Popular brands