manualshive.com logo in svg

Fuji Xerox DocuPrint P355 d, User Manual

Share
Download
Fuji Xerox DocuPrint P355 d User Manual Download Page 158

158

Using the Operator Panel Menus

• PS Job Time-out

Purpose:

To specify the runtime of one PostScript job. The change becomes effective after the printer is turned off and then on 
again.

Values:

• PaperSelect Mode

Purpose:

To set the way to select the paper tray for PostScript mode. The change becomes effective after the printer is turned 
off and then on again.

Values:

Network Setup (DocuPrint P355 d Only)

Use the 

Network Setup

 menu to change the printer settings affecting jobs sent to the printer through the network.

NOTE: 

•

Values marked by an asterisk (*) are the factory default menu settings.

• Ethernet

NOTE: 

•

Ethernet feature is available only when the printer is connected using the wired network.

Purpose:

To specify the communication speed and the duplex settings of Ethernet. The change becomes effective after the 
printer is turned off and then on again.

Values:

Off*

Job time-out does not occur.

On

1min

A PostScript error occurs if processing is not completed after the specified 
time.

1-900min

Auto*

The tray is selected as the same setting as in the PCL mode.

Select FromTray

The tray is selected in a method compatible with regular PostScript printers.

Auto

*

Detects the Ethernet settings automatically.

10BASE-T Half

Uses 10BASE-T Half-duplex.

10BASE-T Full

Uses 10BASE-T Full-duplex.

100BASE-TX Half

Uses 100BASE-TX Half-duplex.

100BASE-TX Full

Uses 100BASE-TX Full-duplex.

1000BASE-T Full

Uses 1000BASE-T Full-duplex.

Summary of Contents for DocuPrint P355 d

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands