Fuji Xerox DocuPrint P355 d User Manual Download Page 157

Page: 157 / 272

Using the Operator Panel Menus

157

• Collated

Purpose:

To specify whether to sort the job.

Values:

• Output Size

Purpose:

To specify the output paper size for PDF.

Values:

The default paper size is displayed.

• Layout

Purpose:

To specify the output layout.

Values:

PS Settings

Use the

PS Settings

menu to change printer settings that only affect jobs using the PostScript

emulation printer

language.

NOTE:

•

Values marked by an asterisk (*) are the factory default menu settings.

• PS Error Report

Purpose:

To specify whether to print the contents of PostScript errors. The change becomes effective after the printer is turned
off and then on again.

Values:

NOTE:

•

Instructions from the PS driver override the settings specified on the operator panel.

Off

Does not sort the job.

Sorts the job.

A4 - 210x297

Letter - 8.5x11

Auto

Auto %

100% (No Zoom)
Booklet
2 Pages Up
4 Pages Up

Off

Discards the print job without printing an error message.

On*

Prints an error message before it discards the job.

Summary of Contents for DocuPrint P355 d
















































































































































































































































































Search results

Summary of Contents for DocuPrint P355 d

Reviews:

Related manuals for DocuPrint P355 d

Brands by name

Popular brands

Fuji Xerox DocuPrint P355 d, User Manual

Search results

Summary of Contents for DocuPrint P355 d

Reviews:

Related manuals for DocuPrint P355 d

Brands by name

Popular brands