Fuji Xerox DocuPrint P355 d, User Manual

Page: 156 / 272

156
Using the Operator Panel Menus
• A4 Wide
Purpose:
To expand the printable area width 8 inch.
Values:
PDF Settings
Use the
PDF Settings
menu to change printer settings that only affect the PDF jobs.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• Quantity
Purpose:
To specify the number of copies to print.
Values:
• 2-Sided Print
Purpose:
To specify whether to print on both sides of a sheet of paper.
Values:
• Print Mode
Purpose:
To specify the print mode.
Value:
• Password
Purpose:
To specify the password to print the secure PDF.
Value:
Off
*
Disables A4 Wide.
On Enables A4 Wide.
1sets
*
Sets the value in increments of 1.
1 – 999sets
1-Sided
*
Prints on one side of a sheet of paper.
Long Edge Flip Prints on both sides of a sheet of paper to be bound by long edge.
Short Edge Flip Prints on both sides of a sheet of paper to be bound by short edge.
Normal
*
For documents with normal sized characters.
High Quality For documents with small characters or thin lines, or documents
printed using a dot-matrix printer.
High Speed Prints with the higher speed than the Normal mode, but the quality is
less.
Password Enter the password to print the secure PDF.