manualshive.com logo in svg

Fuji Xerox DocuPrint P355 d, User Manual

Share
Download
Fuji Xerox DocuPrint P355 d User Manual Download Page 121

Printing Basics

121

Loading Print Media in the Standard 250 Sheet Tray and 
the Optional 250 Sheet Feeder

NOTE: 

•

To avoid paper jams, do not remove the tray while printing is in progress.

•

Use only laser print media. Do not use ink jet print media in your printer.

1

Pull the tray out of the printer about 200 mm.

2

Hold the tray with both hands, and remove it from the printer.

3

Adjust the paper guides.

NOTE: 

•

When loading Legal size or user-specified print media, slide the extendable part of the tray while pinching the lever.

4

Before loading the print media, flex the sheets and fan them. Straighten the edges of the stack on a level 
surface.

Summary of Contents for DocuPrint P355 d

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands