Fuji Xerox DocuPrint P255 dw User Manual Download Page 211

Page: 211 / 252

Troubleshooting

211

Streaks Appear on the Output

If this trouble happens, contact our local representative office or authorized dealer.

Mottle

NOTE:

•

If the problem continues even though you have taken suggested actions described above, contact our local
representative office or authorized dealer.

Problem

Action

The printed result has mottled
appearance.

Adjust the transfer bias.

Launch the Printer Setting Utility, click

Adjust BTR

on the

Printer

Maintenance

tab.

Adjust the setting for the type of print media being used.

Click the

Apply New Settings

button.

If you use non-recommended print media, use the print media
recommended for the printer.

Summary of Contents for DocuPrint P255 dw





























































































































































































































































Search results

Summary of Contents for DocuPrint P255 dw

Reviews:

Related manuals for DocuPrint P255 dw

Brands by name

Popular brands

Fuji Xerox DocuPrint P255 dw, User Manual

Search results

Summary of Contents for DocuPrint P255 dw

Reviews:

Related manuals for DocuPrint P255 dw

Brands by name

Popular brands