Fuji Xerox DocuPrint M355 df User Manual Download Page 208

Page: 208 / 428

208

Scanning



Sending the Scanned File on the Network

Load the document(s) face up with top edge in first into the DADF.
OR

Place a single document face down on the document glass, and close the document cover.

Press the

(

Scan

) button.

Select

Scan to Network

, and then press the

button.

Select

Scan to

, and then press the

button.

Select

Computer (Network)

Server (FTP)

, or

Search Address Book

, and then press the

button.

•

Computer (Network)

: Stores the scanned image on the computer by using the SMB protocol.

•

Server (FTP)

: Stores the scanned image on the server by using the FTP protocol.

•

Search Address Book

: Select the server address registered in Address Book.

Select the destination to store the scanned file in, and then press the

button.

Configure the scanning settings as necessary.

Press the

(

Start

) button to send the scanned files.

Summary of Contents for DocuPrint M355 df












































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint M355 df

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint M355 df, User Manual

Search results

Summary of Contents for DocuPrint M355 df

Reviews:

Brands by name

Popular brands