Fuji Xerox DocuPrint M355 df User Manual Download Page 132

Page: 132 / 428

132

Printing Basics



Loading Print Media in the Standard 250 Sheet Tray and
the Optional 250 Sheet Feeder

NOTE:

•

To avoid paper jams, do not remove the tray while printing is in progress.

•

Use only laser print media. Do not use ink jet print media in your printer.

Pull the tray out of the printer about 200 mm.

Hold the tray with both hands, and remove it from the printer.

Adjust the paper guides.

NOTE:

•

When loading Legal size or user-specified print media, slide the extendable part of the tray while pinching the lever.

Summary of Contents for DocuPrint M355 df












































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint M355 df

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint M355 df, User Manual

Search results

Summary of Contents for DocuPrint M355 df

Reviews:

Brands by name

Popular brands