manualshive.com logo in svg

Fuji Xerox DocuPrint M255 df, User Manual

Share
Download
Fuji Xerox DocuPrint M255 df User Manual Download Page 47

Basic Operation

47

Power Saver Mode

The printer has a power saving feature that reduces power consumption during periods of inactivity 
and operates in two modes: Low Power and Sleep. In Low Power mode, only the LCD panel goes 
blank. In Sleep mode, all LEDs, except for the 

 (

Energy Saver

) LED, on the operator panel go out 

and the LCD panel goes blank. When the printer is in Sleep mode, it consumes less power than in 
Low Power mode.
By default, the printer enters Low Power mode in one minute of inactivity after completion of the last 
job, and then enters Sleep mode in another six minutes of inactivity. You can change these default 
settings in the following ranges:
Low Power mode: 1 to 30 minutes
Sleep mode: 6 to 11 minutes

See also: 

• "Changing the Power Saver Mode Settings" on page 334

„

Exiting the Power Saver Mode

The printer automatically exits the power saver mode when it receives a print job from a computer or 
fax data through the telephone line. Alternatively, you can manually bring it back into standby mode. 
Press any button on the operator panel in Low Power mode. In Sleep mode, press the 

 (

Energy 

Saver

) button. Whether the printer is in Low Power or Sleep mode, it will take about 25 seconds for 

the printer to resume standby mode.

NOTE: 

•

In Low Power mode, opening and closing the rear cover will bring the printer back into standby mode.

•

When the printer is in Sleep mode, all buttons on the operator panel except for the 

 (

Energy Saver

) button 

do not function. To use the buttons on the operator panel, press the 

 (

Energy Saver

) button to exit the 

power saver mode.

See also: 

• "Changing the Power Saver Mode Settings" on page 334

Summary of Contents for DocuPrint M255 df








































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands