Fuji Xerox DocuPrint M255 df User Manual Download Page 364

Page: 364 / 423

364

Troubleshooting

Random Spots/Blurred Images

NOTE:

•

If the problem continues even though you have taken suggested actions described above, contact our local
representative office or authorized dealer.

The Entire Output Is Blank

If this trouble happens, contact our local representative office or authorized dealer.

Problem

Action

The printed result has random
spots or is blurred.

Ensure that the toner cartridge is installed correctly.

If you use a non-genuine brand toner cartridge, install a genuine
brand toner cartridge.
Clean up the fusing unit.

Load one sheet of paper in the paper tray, and then print a solid
image all over paper.

Load the printed sheet with the print surface facing down, and then
print a blank sheet of paper.

Summary of Contents for DocuPrint M255 df








































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint M255 df

Reviews:

Brands by name

Popular brands

Fuji Xerox DocuPrint M255 df, User Manual

Search results

Summary of Contents for DocuPrint M255 df

Reviews:

Brands by name

Popular brands