Fuji Xerox DocuPrint M255 df, User Manual

Page: 172 / 423

172 Printing Basics
„ Printing Custom Size Paper
This section explains how to print on custom size paper using the print driver.
The way to load custom size paper is the same as the one to load standard size paper.
• "Loading Print Media in the Paper Tray" on page 144
• "Loading Print Media in the Priority Sheet Inserter (PSI)" on page 152
• "Setting Paper Sizes and Types" on page 158
Defining a Custom Paper Size
Before printing, define a custom size on the print driver.
NOTE:
• When defining a paper size on the print driver or the operator panel, be sure to specify the same size as the
actual print media used. Specifying a wrong size for printing can cause a printer failure. This is especially true
if you specify a bigger size when using a narrow width paper.
• Using the Windows Print Driver
On the Windows print driver, define a custom size in the Custom Paper Size dialog box. This section
explains the procedure using Windows 7 as an example.
On Windows XP or later, only users with administrator rights can use the administrator's password to
change the settings. Users without the rights of administrator can only view the contents.
1
Click Start
→
Devices and Printers .
2
Right-click the icon for your printer, and then select Printer properties .
3
Select the Configuration tab.
4
Click Custom Paper Size .
5
Select the custom setup you want to define from Details .
6
Specify the length of the short edge and long edge under Change Setting For . You can specify
the values either by entering them directly or using the up arrow and down arrow buttons. The
length of the short edge cannot be longer than the long edge, even if it is within the specified
range. The length of the long edge cannot be shorter than the short edge, even if it is within the
specified range.
7
To assign a paper name, select the Name the Paper Size check box, and then enter the name in
Paper Name . Up to 14 characters can be used for the paper name.
8
If necessary, repeat steps
5
to
7
to define another custom size.
9
Click OK twice.