manualshive.com logo in svg

Fuji Xerox DocuPrint M255 df, User Manual

Share
Download
Fuji Xerox DocuPrint M255 df User Manual Download Page 15

Safety Notes

15

Safety Notes

Before using this product, read “Safety Notes” carefully for safety use.
This product and recommended supplies have been tested and found to comply with strict safety 
requirements including safety agency approvals and compliance with environmental standards. Follow 
the following instructions for safety use.

Follow all warning instructions marked on this product. The warning marks stand for the followings:

WARNING:

•

Any unauthorized alteration including an addition of new functions or connection to external devices 
may not be covered by the product warranty. Contact your local Fuji Xerox representative for more 
information.

Used for item that if not followed strictly, can lead death or severe or 
fatal injuries and the possibility to do it is comparatively high.
Used for items that if not followed strictly, can lead to severe or fatal 
injuries.
Used for items that if not followed strictly, can cause injuries to user or 
damages to machine.

: A symbol for items to pay attention to when handling machine. 

Follow instructions carefully to use machine safely.

: A symbol for prohibited items. Follow instructions carefully to avoid 

any dangerous acts.

: A symbol for items that must be performed. Follow instructions 

carefully to carry out these essential tasks.

Caution

Flammable Explodable

Electric 

shock

Heated 
surface

Moving 

object

Pinched 

fingers

Prohibited

No fire

Do not touch Do not use in 

bathroom

Do not tear 

down

Keep away 

from wet

Never touch 

with wet hand

Instructions

Unplug

Ground/ 

Earth

Summary of Contents for DocuPrint M255 df








































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands