manualshive.com logo in svg

Fuji Xerox DocuPrint M255 df, User Manual

Share
Download
Fuji Xerox DocuPrint M255 df User Manual Download Page 10

10

Trademarks and Document Disclaimer

Trademarks and Document Disclaimer

Apple

®

, Bonjour

®

, ColorSync

®

, Macintosh

®

, and Mac OS

®

 are trademarks of Apple Inc. in the United 

States and/or other countries.
PCL

®

 is a trademark of Hewlett-Packard Corporation in the United States and/or other countries.

Microsoft

®

, Windows Vista

®

, Windows

®

, and Windows Server

®

 are trademarks of 

Microsoft Corporation in the United States and/or other countries.
Linux is a registered trademark of Linus Torvalds.
Novell is a registered trademark and SUSE is a trademark of Novell, Inc. in the United States and 
other countries.
Red Hat and Red Hat Enterprise Linux are registered trademarks of Red Hat, Inc. in the U.S. and 
other countries.
RSA, BSAFE are either registered trademarks or trademarks of EMC Corporation in the United States 
and/or other countries.
Mozilla is a registered trademark of the Mozilla Foundation.
All product/brand names are trademarks or registered trademarks of the respective holders.

XEROX, the sphere of connectivity design, CentreWare Internet Services, and DocuPrint are 
trademarks or registered trademarks of Xerox Corporation in the U.S. or Fuji Xerox Co., Ltd. 
DocuWorks is a trademark of Fuji Xerox Co., Ltd. 
All Xerox and Fuji Xerox product names are either registered trademarks or trademarks of Xerox 
Corporation or Fuji Xerox Co., Ltd.

In this manual, safety instructions are preceded by the symbol 

. Always read and follow the instructions 

before performing the required procedures.

Fuji Xerox is not responsible for any breakdown of machines due to infection of computer virus or computer 
hacking.

WARNING: 

This equipment will be inoperable when mains power fails.

IMPORTANT: 

1. This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may not be copied 

or modified in whole or part, without the written consent of the publisher.

2. Parts of this manual are subject to change without prior notice.
3. We welcome any comments on ambiguities, errors, omissions, or missing pages.
4. Never attempt any procedure on the machine that is not specifically described in this manual. Unauthorized 

operation can cause faults or accidents. Fuji Xerox is not liable for any problems resulting from unauthorized 
operation of the equipment.

5. Decompiling this manual is prohibited.

An export of this product is strictly controlled in accordance with Laws concerning Foreign Exchange and 
Foreign Trade of Japan and/or the export control regulations of the United States.

Summary of Contents for DocuPrint M255 df








































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands