Fuji Xerox DocuPrint M218 fw, User Manual

Page: 359 / 468

Using the Operator Panel Menus and Keypad 358
• Paper Error
Purpose:
To specify whether to display an error when the specified output paper size does not match the loaded
paper.
IMPORTANT:
• Printing repeatedly on the paper smaller than the specified output paper size may make the interior of your
printer dirty, which may result in poor print quality or breakdown in your printer.
Values:
Scan Defaults
Use the
Scan Defaults
menus to configure a variety of scanner features.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• Scan to Network
Purpose:
To store the scanned image on a network server or on a computer.
Values:
• File Format
Purpose:
To specify the file format to save the scanned image.
Values:
• Color
Purpose:
To set the color mode.
Values:
Off * Does not display an error when the specified output paper size does
not match the loaded paper.
On Displays an error when the specified output paper size does not
match the loaded paper.
Computer(Net)* Stores the scanned image on a computer using the Server Message
Block (SMB) protocol.
Server(FTP) Stores the scanned image on a server using the FTP protocol.
PDF*
TIFF
JPEG
Black & White Scans in black and white mode. This is available only when
File
Format
is set to
PDF
or
TIFF
.
Grayscale Scans in grayscale mode.