Fuji Xerox DocuPrint M218 fw, User Manual

Page: 200 / 468

199 Copying
Preparing a Document
You can use the document glass or the Automatic Document Feeder (ADF) to load an original
document for copying, scanning and sending a fax. You can load up to 15 sheets of 64 gsm
documents for one job using the ADF or one sheet at a time using the document glass.
IMPORTANT:
• Avoid loading documents that are smaller than 148.0
×
210.0 mm (5.83
×
8.27 inch) or larger than 215.9
×
355.6 mm (8.5
×
14 inch), different sizes or weights together, booklets, pamphlets, transparencies, or
documents having other unusual characteristics in ADF.
• Carbon-paper or carbon-backed paper, coated paper, onion skin or thin paper, wrinkled or creased paper,
curled or rolled paper or torn paper cannot be used in ADF.
• Do not use the documents with staples, paper clips or exposed to adhesives or solvent based materials such
as glue, ink and correcting fluid in ADF.
NOTE:
• To get the best scan quality, especially for color or gray scale images, use the document glass instead of the
ADF.