Fuji Xerox DocuPrint M215 fw, User Manual

Page: 224 / 476

223 Copying

Margin Top/Bottom
You can specify the top and bottom margins of the copy.
1
For the DocuPrint M215 fw, load the document(s) face up with top edge in first into the ADF or
place a single document face down on the document glass, and close the document cover.
For the DocuPrint M215 b, place a single document face down on the document glass, and close
the document cover.
See also:
• "Making Copies From the ADF (DocuPrint M215 fw Only)" on page 208
• "Making Copies From the Document Glass" on page 206
2
Press the Copy button.
3
Select
Margin Top/Bottom
, and then press the button.
4
Press the or button or enter the desired value using the numeric keypad, and then press
the
button.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
5
If necessary, customize the copy settings including the number of copies, copy size, and image
quality.
See also:
• "Setting Copy Options" on page 209
6
Press the ( Start ) button to begin copying.
4 mm*/0.2 inch* Specify the value in increments of 1 mm/0.1 inch.
0-50 mm/0.0-2.0 inch