manualshive.com logo in svg

Fuji Xerox DocuPrint CP305 d, User Manual

Share
Download
Fuji Xerox DocuPrint CP305 d User Manual Download Page 254

253

Maintenance

„

Overview

The printer has toner cartridges of four colors: black (K), yellow (Y), magenta (M), and cyan (C).
When a toner cartridge reaches its usable life-span, the following messages appear on the LCD panel.

IMPORTANT: 

•

When placing a used toner cartridge on the floor or on a table, place a few sheets of paper under the toner 
cartridge to catch any toner that may spill.

•

Do not reuse old toner cartridges once you remove them from the printer. Doing so can impair print quality.

•

Do not shake or pound the used toner cartridges. The remaining toner may spill.

•

We recommend you to use up the toner cartridges within one year after removing them from the packaging.

Message

Action

Replace XXXX Toner 
Cartridge Soon

The toner cartridge has become empty. Replace the old toner 
cartridge with a new one.

Summary of Contents for DocuPrint CP305 d












































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands