Fuji Xerox DocuPrint CP215 Series User Manual Download Page 200

Page: 200 / 246

200

Troubleshooting



Entering Values

Using the Operator Panel

Using the operator panel, enter the values that you found in the color registration chart to make
adjustments.

Press the

(

Menu

) button.

Select

Admin Menu

, and then press the

button.

Select

Maintenance Mode

, and then press the

button.

Select

Adjust ColorRegi

, and then press the

button.

Select

Enter Number

, and then press the

button.

Confirm that

Enter (Y, M, C)

appears, and then press the or button until you reach the

value (for example,

) displayed on the chart.

Press the button once and move the cursor to the next color.

Repeat steps

and

to enter all of the digits, and then press the

button.

Confirm that

Enter (LY, LM, LC)

appears.

Press the or button until you reach the value (for example,

) displayed on the chart.

Press the button once and move the cursor to the next color.

Repeat steps

and

to enter all of the digits, and then press the

button.

Confirm that

Enter (RY, RM, RC)

appears.

Press the or button until you reach the value (for example,

) displayed on the chart.

Press the button once and move the cursor to the next color.

Repeat steps

and

to enter all of the digits, and then press the

button.

The top screen appears.

Perform steps

to enter the

Adjust ColorRegi

menu.

Select

Color Regi Chart

, and then press the

button.

The color registration chart is printed with the new values.

Adjust until all straight lines are at the value of 0. Viewing the images before and after will help.

Summary of Contents for DocuPrint CP215 Series






















































































































































































































































Search results

Summary of Contents for DocuPrint CP215 Series

Reviews:

Related manuals for DocuPrint CP215 Series

Brands by name

Popular brands

Fuji Xerox DocuPrint CP215 Series, User Manual

Search results

Summary of Contents for DocuPrint CP215 Series

Reviews:

Related manuals for DocuPrint CP215 Series

Brands by name

Popular brands