Fuji Xerox DocuPrint CP215 Series, User Manual

Page: 154 / 246

154 Using the Operator Panel Menus
• Wireless LAN (DocuPrint CP215 w Only)
Purpose:
To enable the wireless connection.
Values:
NOTE:
• When you use the USB connection and do not use the wireless connection, you need to disable
Wireless
LAN
.
• Wireless Status (DocuPrint CP215 w Only)
Purpose:
To display the information on the wireless signal strength. No changes can be made on the operator
panel to improve the status of the wireless connection.
Values:
NOTE:
• This item is displayed when the Ethernet cable is disconnected and
Wireless LAN
is set to
Enable
.
• Wireless Setup (DocuPrint CP215 w Only)
Purpose:
To configure the wireless network interface.
Values:
Enable
* Enables the wireless connection.
Disable
Disables the wireless connection.
Good
Indicates good signal strength.
Acceptable
Indicates marginal signal strength.
Low
Indicates insufficient signal strength.
No Reception
Indicates that no signal is received.
Select
Access
Select the access point from the list. The access points are listed starting with the one in the
best communication condition.
WEP Key
When you select an access point using WEP as the security method,
enter the WEP key. For 64bit keys, enter 10 hexadecimal characters.
For 128bit keys, enter 26 hexadecimal characters.
PassPhraseEntry
When you select an access point using WPA, WPA2, or Mixed as the
encryption type, enter the passphrase of 8 to 63 alphanumeric
characters.