Fuji Xerox DocuPrint CP105 b Page 165 User Manual Download

Page: 165 / 185

Maintenance

164

Installing a Toner Cartridge

Unpack a new toner cartridge of the desired color and shake it five to six times to distribute the
toner evenly.

NOTE:

•

Ensure that the color of the new toner cartridge matches that on the handle before replacing it.

•

Handle the toner cartridge carefully to avoid spilling of the toner.

Remove the tape from the toner cartridge.

Adjust the toner cartridge to the associated cartridge holder, and then insert it firmly by pressing
near the center of the label until the toner cartridge clicks.

Close the toner access cover.

Summary of Contents for DocuPrint CP105 b


























































































































































































Search results

Summary of Contents for DocuPrint CP105 b

Reviews:

Related manuals for DocuPrint CP105 b

Brands by name

Popular brands

Fuji Xerox DocuPrint CP105 b, User Manual

Search results

Summary of Contents for DocuPrint CP105 b

Reviews:

Related manuals for DocuPrint CP105 b

Brands by name

Popular brands