Fuji Xerox DocuPrint CM505 da, Administrator'S Manual, Page: 65 / 599

Replacing Consumables
65
M
ai
n
te
na
nc
e
3
20
Close the front cover.
Note • If the front cover is not completely closed,
a message will appear and the machine
will remain paused.
Replacing Staple Cartridge (for Finisher- AB1)
When the optional Finisher-AB1 is installed and the staple cartridge needs to be
replaced, a message appears on the touch screen. When this message appears, load
a new staple case into the staple cartridge.
Important • The use of staple cartridges not recommended by Fuji Xerox may degrade quality and
performance. Use only staple cartridges recommended by Fuji Xerox.
1
Make sure that the machine is not operating,
and open the finisher front cover.
2
Take the staple cartridge out of the finisher.
3
After you take out the staple cartridge, check
inside of the finisher for any remaining
staples.