Fuji Xerox DocuPrint CM505 da, Administrator'S Manual, Page: 202 / 599

5 Tools
202
T
ools
5
There are priority levels from 1 to 3. All priority can be set, however, if you want to display
only one priority level, make the settings of all priority levels the same.
Note • This feature is not available for some models. An optional component is required. For more
information, contact our Customer Support Center.
Direct Fax
Set whether or not to receive a fax, which is instructed using a fax driver from a computer.
When you select [Disabled], the Direct Fax feature becomes unavailable.
Block Inbound Faxes
Set a G3-ID (fax number) from which you want to reject a fax reception. You can specify up to
50 G3-IDs.
You can find the G3-ID of the sender that you want to reject in "Remote Station" column of an
Activity Report or "Input Source" column of a Job History Report.
Block Unknown Fax Numbers
Set whether or not to receive faxes from unknown G3-ID fax numbers. When [Yes] is
selected, the machine does not receive faxes from unknown fax numbers.
Fax Received Options
Fax Received Options allows you to specify a method for classifying received fax
documents into specified folders.
Folder Selector Setup
If you set the classification by line type, the machine classifies the received documents by line
type and store them in the folders specified.
1
Select [Folder Selector Setup].
2
Select the line to register, and then select
[Change Settings].
Note • The displayed items may vary depending
on the options installed.
3
Select [On].
4
Enter the folder number (three digits) where you want to store the faxes with the
numeric keypad.
5
Select [Save].